Proxxon 24028 Self Centering 3-Jaw Chuck for PD 230/E

Proxxon 24028 Self Centering 3-Jaw Chuck for PD 230/E Reviews

Other Picture

Proxxon 24028 Self Centering 3-Jaw Chuck for PD 230/E Feature

• Self centering for precise and quick set-up
• Proxxon precision german engineering to assist quality workmanship
• Has reversing jaws for easy project changes

3 jaw chuck for PD 230/E

Visit Store Now !!

Detail Products

Detail Reviews

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck Reviews

Other Picture

PSI Woodworking LCM18X 3 Jaw Micro Wood Lathe Chuck Feature

• Micro wood chuck for very small parts
• Three reversible self centering jaws
• Weighs only 1.2 pounds
• Holds workpiece from 3/4-inch to 2-1/2-inch inside
• Holds workpiece up to 1-1/4-inch outside diameter

This self centering, 3 jaw micro chuck is ideal for holding small projects from the inside or outside. Its step jaws reverse for extra versatility. Its smaller diameter provides a safety feature, keeping your knuckles away from the jaws when working close to the chuck. 1' X 8 tpi std thread mount, adapter included for 3/4' x 16 tpiMicro wood chuck for very small partsThree reversible self centering jawsWeighs only 1.2 poundsHolds workpiece from 3/4-inch to 2-1/2-inch insideHolds workpiece up to 1-1/4-inch outside diameter

Visit Store Now !!

Detail Products

• PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set
• Allen Deluxe 4-Bike Hitch Mount Rack (2-Inch Receiver)
• Stamina 1690 Power Tower
• Weber 7527 Stainless Steel Replacement Cooking Grates
• Black & Decker NPT318 18-Volt Cordless Electric Pole Hedge Trimmer

Detail Reviews

5pc. Robert Sorby Intermediate Micro Turning Set

5pc. Robert Sorby Intermediate Micro Turning Set Reviews

Other Picture

A perfect compliment to our #67094 micro-set from Sorby, this intermediate set of micro-tools is ideal for projects a tad larger in size. The slightly heavier section of the HSS blades makes them ideal for small boxes and vessels up to 4" in diameter. Tools have an overall length of approximately 10 to 10-1/2". Ash handles. Made by Robert Sorby. Made in England. 5 Pc. Set: includes 5/16" Roughing Gouge; 1/4" Spindle Gouge; 3/8" Multi-Scraper; 1/2" Skew; and 1/16" Fluted Parting Tool.

Visit Store Now !!

Detail Products

Detail Reviews

3" Bison 3 Jaw Tailstock Chuck-2MT

3" Bison 3 Jaw Tailstock Chuck-2MT Reviews

Other Picture

3" Bison 3 Jaw Tailstock Chuck-2MT Feature

• Size: 3"
• Morse Taper: 2

A rotating chuck for tailstock use. Steel body. Sealed ball bearings. Hardened and ground scroll & pinions. Includes wrench, inside jaws, outside jaws.

Visit Store Now !!

Detail Products

Detail Reviews

WOODTURNING A FRESH APPROACH - By Robert Chapman

WOODTURNING A FRESH APPROACH - By Robert Chapman Reviews

Other Picture

WOODTURNING A FRESH APPROACH - By Robert Chapman Feature

• Focuses on the quality of design.
• Advice on laying out and equipping the workshop
• Tips on how tools and machinery can be improved and adapted.
• How to obtain and convert timber plus reverse chucking.
• Projects for lidded pots & boxes, bowls, and hollow vessels.

This book includes more than 100 examples of the author's work. There are chapters for projects that include lidded pots and boxes, bowls, hollow vessels and more. There are tips on how tools and machinery can be improved and adapted as well as advice on laying out and equipping your workshop.

Visit Store Now !!

Detail Products

Detail Reviews

1/2" Robert Sorby #841 Long & Strong Spindle Blade

1/2" Robert Sorby #841 Long & Strong Spindle Blade Reviews

Other Picture

Many turners prefer to turn their tool handles to their own specifications. For those turners we offer here one of Sorby's selection of the more highly used unhandled tool blades. These High Speed Steel (HSS) unhandled blades are identical to the ones found on the handled versions. The blade listed here will also fit the Sorby Sovereign System Handles. A Collet Adapters may be required if used with the Sovereign System. Check your manual for the size collet required, if any. Made in England.

Visit Store Now !!

Detail Products

Detail Reviews

1-1/4" - 8 TPI 3-1/2" Diameter Aluminum Faceplate

1-1/4" - 8 TPI 3-1/2" Diameter Aluminum Faceplate Reviews

Other Picture

1-1/4" - 8 TPI 3-1/2" Diameter Aluminum Faceplate Feature

• Easy Wood anodized aluminum faceplates are precision machined
• Faceplates are drilled with eight screw holes for secure mounting
• Aluminum faceplates are an excellent choice for green wood turning

Easy Wood anodized aluminum faceplates are precision machined to meet the needs of the most demanding wood turner. Faceplates are drilled with eight screw holes for secure mounting, along with a 5/16 diameter hole for breaking the faceplate free. Aluminum faceplates are an excellent choice for green wood turning since they will not transfer stains or rust and because they are softer than steel they reduce the amount of tool damage from accidental contact.

Visit Store Now !!

Detail Products

Detail Reviews

Lathe Stand, Extended

Lathe Stand, Extended Reviews

Other Picture

Lathe Stand, Extended Feature

• Top measures 8-1/2" x 61-1/2"
• Height 34"
• Weight 64 lbs.
• Constructed of 4mm thick steel

Dont mistake this stand for one of the flimsy, wobbly, sheet metal stands commonly found on the market today. Made from 4mm thick steel, this universal lathe stand is extremely rigid with no racking or flexing. The legs have an extra flange bent on the inside to allow you to insert a piece of plywood creating a "boxed" leg which can be filled with sand for extra vibration dampening. Any lathe that can fit on this stand can be bolted to it after marking and drilling.

Visit Store Now !!

Detail Products

Detail Reviews

4MT - 5" Bull Nose Live Center

4MT - 5" Bull Nose Live Center Reviews

Other Picture

4MT - 5" Bull Nose Live Center Feature

• Morse Taper Shank: 4MT
• 75 degree nose
• Large Dia.: 4.92
• Small Dia.: 1.38
• Length: 7.68

For holding pipes and tubes.

Visit Store Now !!

Detail Products

Detail Reviews

WW collet set, metric

WW collet set, metric Reviews

Other Picture

WW collet set, metric Feature

• Includes collet adapter and hollow drawbar with knurled knob
• Includes five metric size collets2.0 mm, 3.0 mm, 4.0 mm, 5.0 mm and 6.0 mm

WW Collets are machined to close tolerance to hold parts or tools very accurately on center. The adapter presses into the #1 Morse taper of the headstock and the WW collets are drawn into the taper of the adapter by means of a hollow threaded drawbar. The set includes five different size collets, but additional collets are available from 0 .3mm to 8.0mm by 0.1 mm increments. Designed for use with Sherline WW collet adapter or other lathes that accept a WW type collet with a body diameter of .312-.313".

Visit Store Now !!

Detail Products

Detail Reviews

10" M290 Bison 3 Jaw Chuck

10" M290 Bison 3 Jaw Chuck Reviews

Other Picture

10" M290 Bison 3 Jaw Chuck Feature

• Size: 10"
• D (Chuck Diameter): 10"
• B (Bolt Circle): 8 7/8"
• A (Recess): 7 7/8"
• C (Thru-Hole): 3 1/8"

Semi-Steel. Plain back. Made in Poland by BISON. TYPE M290 INCLUDES 1 Set Solid External Jaws and 1 Set Solid Internal Jaws and Key. TYPE P-290 includes 1 Set hard reversible top jaws and 1 set master jaws and key. (Type P290 can take soft top jaws for production jobs)

Visit Store Now !!

Detail Products

Detail Reviews

Robert Sorby #832H Fluted Parting Tool

Robert Sorby #832H Fluted Parting Tool Reviews

Other Picture

Robert Sorby #832H Fluted Parting Tool Feature

• #832H Fluted Parting Tool
• Size: 3/16'' (5mm)
• Overall Length: 18-1/2''
• Handle Length: 12''
• Robert Sorby

Fluted Parting Tool - This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibers to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut.

Size: 3/16" (5mm).
Code: 832H.
Overall Length: 18-1/2".
Handle Length: 12".

Visit Store Now !!

Detail Products

Detail Reviews

Turning Pens Video DVD - 2

Turning Pens Video DVD - 2 Reviews

Other Picture

Turning Pens Video DVD - 2 Feature

• Making a European style pen with a Blackwood centerband
• Making the American style Rollerball and Fountain pen
• Techniques for turning plastic and antler
• Tips and Tricks, including: drying pen blanks, cleaning the brass tube, the "potato trick"
• Drill bits, drilling jigs and tips, assembly jigs and tips and disassembling a pen

by Rex Burningham and Kip Christensen. After writing Turning Pens And Pencils, the definitive book on pen making, Kip and Rex follow with DVD II: More Pens Plus Tips and Tricks. Topics covered in DVD II include: The European style pen. The American style rollerball. Fountain pens. Techniques for turning plastic, Turning antlers, and Many more tips and tricks. Running time: 1 hour, 28 minutes

Visit Store Now !!

Detail Products

Detail Reviews